PRODUCTS

DIE NUT

RENEW, CUT THREADS, AND TAP HOLES IN TIGHT SPACES

THE IS A MUST HAVE FOR ANY MECHANIC, MACHINE, OR MAINTENANCE SHOP
  • reversible swivel switch to quickly change directions.
  • accepts dies of 1” or 25mm diameter.
  • adaptor bushing for hex and 12-sided dies.
  • adjustable self-centering mini-vice (made of tool steel) holds various size taps and screwdriver bits.

The Die Nut‘s hollow center allows bolts & screws to come through.

The adjustable mini-vice can accommodate different tap diameters.

The adjustable sleeve for dies with 6 & 12 sides makes this a unique tool.

RATCH-CUT 375

AUTOMATIC “TIGHTENING OF THE KNOB ONLY ONCE”

Cutting capacity: 1/8″(3.17mm) – 3/8″ (10mm)

This semi-automatic tube-cutter is equipped with a unique telescopic
spring-load action mechanism that allows only one tightening on the tube
to complete the cut in very hard-to-reach places.

Specially designed for the automotive, aircraft, marine trade to service fuel lines,
brake lines, vacuum lines, air-conditioning lines, hydraulic industries, maintenance,
etc. Easily adjusts to fit tubing and the ratchet motion allows it to make a quick
clean cut in hard-to-reach places.

Material: Red high-impact fiberglass/rynite handle

Cuts : Steel, Stainless Steel, Copper, Aluminum, Brass, Plastic and PVC.

Reference : RC375-A

RATCH-CUT 1125

AUTOMATIC “TIGHTENING OF THE KNOB ONLY ONCE”

Cutting capacity: 5/16″(8mm)-1-1/8″(28.5mm)

This semi-automatic tube-cutter is equipped with a unique telescopic
spring-load action mechanism that allows only one tightening on the tube
to complete the cut in very hard-to-reach places.

Specially designed for the plumbing, automotive, aircraft, marine,
air-conditioning, hydraulic industries, maintenance, chemical labs,
refinery, etc.
Easily adjusts to fit tubing and the ratchet motion allows it to make a quick clean
cut in hard-to-reach places.

Material: Fiberglass/Rynite Handle

Cuts : Steel, Soft Stainless Steel, Copper, Aluminum, Brass, Plastic and PVC.

Reference : RC1125-A

RATCH-CUT 1125 HD

DESIGNED TO CUT TUBES AND PIPES IN HARD-TO-REACH PLACES WITH A SIMPLE RATCHET MOTION.

The Rach-Cut HD is specially designed to reach tubes and pipes mounted close to flat surfaces such as walls and ceilings, as well as under sinks and hard-to-reach engine housings. The all-in-one tool cuts plastic, copper, stainless and carbon steel pipes and tubes up to 1 1/8”.

SANDBOSS 1500

DESIGNED FOR OPTIMUM CONTROL AND SHADOW-FREE FINISHES

Made from precision CNC machined parts and high-quality molded parts, as well as the highest natural rubber EPDM. The assembly allows for easy replacement of parts if necessary.

Size when fitted with abrasive 1-9/16″Dia by 4-½” long
Shaft Diameter 5/16″
Maximum PSI 20
Maximum RPM 5000

Recommended for use with :
✓  Electric Drill
✓ Flex Shaft
✓  Drill Press

SANDBOSS 1750

DESIGNED FOR OPTIMUM CONTROL AND SHADOW-FREE FINISHES

Made from precision CNC machined parts and high-quality molded parts,
as well as the highest natural rubber EPDM. The assembly allows
for easy replacement of parts if necessary.

Size when fitted with abrasive 1-3/4″ Dia by 2-½” long
Shaft Diameter 5/16″
Maximum PSI 17
Maximum RPM 3000

Recommended for use with :
✓  Electric Drill
✓  Flex Shaft
✓  Drill Press

SANDBOSS 2500

DESIGNED FOR OPTIMUM CONTROL AND SHADOW-FREE FINISHES

Made from precision CNC machined parts and high-quality molded parts,
as well as the highest natural rubber EPDM. The assembly allows
for easy replacement of parts if necessary.

Size when fitted with abrasive 1-3/4″ Dia by 2-½” long
Shaft Diameter 5/16″
Maximum PSI 17
Maximum RPM 3000

Recommended for use with:
✓  Electric Drill
✓  Flex Shaft
✓  Drill Press

SANDBOSS 4000 3/8

DESIGNED FOR OPTIMUM CONTROL AND SHADOW-FREE FINISHES

Made from precision CNC machined parts and high-quality molded parts,
as well as the highest natural rubber EPDM. The assembly allows
for easy replacement of parts if necessary.

Size when fitted with abrasive 3-3/4″Diameter by 5-3/8″ long
Shaft Diameter 3/8″
Maximum PSI 15
Maximum RPM 3000

Recommended for use with:
✓  Electric Drill
✓  Flex Shaft
✓  Drill Press

SANDBOSS 4000 14mm

DESIGNED FOR OPTIMUM CONTROL AND SHADOW-FREE FINISHES

Made from precision CNC machined parts and high-quality molded parts,
as well as the highest natural rubber EPDM. The assembly allows
for easy replacement of parts if necessary.

Shaft Diameter 14mm
Maximum PSI 15
Maximum RPM 3000

Recommended for use with:
✓  Electric Drill
✓  Flex Shaft
✓  Drill Press

SANDBOSS 4000 5/8 – 11

DESIGNED FOR OPTIMUM CONTROL AND SHADOW-FREE FINISHES

Made from precision CNC machined parts and high-quality molded parts,
as well as the highest natural rubber EPDM. The assembly allows
for easy replacement of parts if necessary.

Size when fitted with abrasive 3-3/4″Diameter by 5-3/8″ long
Shaft Internal Threading 5/8-11 & 14m
Maximum PSI 15
Maximum RPM 3000

Recommended for use with:
✓  Bench Grinder
✓  Angle Grinder

SANDBOSS 5000 14mm

DESIGNED FOR OPTIMUM CONTROL AND SHADOW-FREE FINISHES

Made from precision CNC machined parts and high-quality molded parts,
as well as the highest natural rubber EPDM. The assembly allows
for easy replacement of parts if necessary.

Shaft Diameter 14mm
Maximum PSI 15
Maximum RPM 3000

Recommended for use with:
✓  Electric Drill
✓  Flex Shaft
✓  Drill Press

SANDBOSS 5000 5/8 – 11

DESIGNED FOR OPTIMUM CONTROL AND SHADOW-FREE FINISHES

Made from precision CNC machined parts and high-quality molded parts,
as well as the highest natural rubber EPDM. The assembly allows
for easy replacement of parts if necessary.

Size when fitted with abrasive 5″ Diameter by 3½” long
Shaft Inside Diameter 5/8″ by 11″ or (14mm)
Maximum PSI 5
Maximum RPM 3800

Recommended for use with:

✓  Bench Grinder
✓  Angle Grinder